SERAL + SAVU
2
SERAL OVERVIEW
SPECS ONE SIZE
Cubic Inches 427
Liters 7
Pounds* 0.82
Kilograms* 0.37
Inches 8h x 13w x 6d
Centimeters 20h x 33w x 15d
* Pack weight does not include reservoir
SERAL FEATURES
1 Easily accessible zippered main compartment
with internal tool organization
2 Magnetic hipbelt bite valve attachment
3 Hydraulics® 1.5L lumbar reservoir included
4 Blinker light attachment
5 Dual zippered hipbelt pockets
2
1
4
5
3
RESERVOIR SLEEVE
SERAL
The dedicated internal reservoir sleeve is compatible with the
Hydraulics® 1.5L lumbar reservoir.
RESERVOIR BITE VALVE MAGNET
The reservoir bite valve magnet's placement can be adjusted by moving its placement
along the left hipbelt webbing daisy chain.
1 Insert reservoir into sleeve and use the internal hanging loop with buckle to
ensure proper vertical orientation and stability.
2 Hose exits from the side of the main compartment zippered access point.
3 Wrap hose around the front of the body, from right to left, and attach hose to the
magnetic bite valve attachment point.
For more information on reservoir care, visit osprey.com.
ADJUST HOSE LENGTH
1 Put on pack and determine appropriate tube length — measure twice and mark
location to cut hose.
2 Slide the magnet away from the bite valve to a point below where the cut will be made.
3 Hold the bite valve in one hand and the tube in the other and pull fi rmly to remove.
4 Cut the tubing at the marked point and reinstall the bite valve (twist and push to
insert), making sure the magnet is still on the tubing.
RESERVOIR HOSE ADJUSTMENTS:
FABRIC
MAIN 210D Poly Honeycomb
ACCENT 420HD Packcloth
BOTTOM 420HD Packcloth
To Next Page
Loading...
Need help?
General
