20
Guidance and manufacturer’s declaration – electromagnetic immunity
Össur Myoelectric Prosthetic Devices are intended for use in the electromagnetic environment specified below.
The customer or the user of the Össur Myoelectric Prosthetic Devices should assure that each are used in such
an environment.
Immunity test IEC
test level
Compliance level Electromagnetic environment – guidance
Electrostatic discharge
(ESD)
IEC --
± kV contact
± kV air
± kV contact
± kV air
Floors should be wood, concrete, or
ceramic tile. If floors are covered with
synthetic material, the relative humidity
should be at least %.
Portable and mobile RF communications
equipment should be used no closer to
any part of the Össur Myoelectric
Prosthetic Devices, including cables,
than the recommended separation
distance calculated from the equation
applicable to the frequency of the
transmitter
Electrical fast transient/
burst
IEC --
Not applicable Not applicable
Battery Powered
Not applicable
Battery Powered
No Cables > m
Surge
IEC --
Not applicable Not applicable
Battery Powered
Not applicable
Battery Powered
Voltage dips,
short interruptions and
voltage
variations on power
supply
IEC --
Not applicable Not applicable
Battery Powered
Not applicable
Battery Powered
No Cables > m
Power frequency (/
Hz) magnetic
field
IEC --
A/m A/m
/ Hz
Battery Powered