Need help?Do you have a question about the Ossur PRO-FLEX XC TORSION and is the answer not in the manual?
General| Type | Prosthetic Foot |
|---|---|
| Weight | Varies by size |
| Material | Carbon Fiber |
| Impact Level | High |
| Heel Height | 10 mm |
| Toe Type | Split toe |
| Water Resistance | No |
| Features | Torsion shock absorption |
| Product Weight | Varies by size |
| Sizes | 22-30 |
| Warranty | 36 months |
| Connector | Pyramid |
| Flexibility | Dynamic |
| Terrain Adaptation | Good |
Details the mechanical foot with integrated torsion and shock absorbing adapter.
Covers indications, contraindications, and intended use for limb loss fittings.
Guide to select the appropriate category based on user weight and activity.
Lists weight, build height, and maximum user weight for size 27.
Outlines potential risks, adapter compatibility, and handling precautions.
Advises on shoe horn use, finger safety, and protective film removal.
Explains the device's weather resistance and limitations regarding water.
Steps for fitting, heel height, angles, and load line positioning.
Explains energy storage and release during gait cycle.
Addresses heel too soft/hard symptoms and corrective actions.
Guidance on using recommended foot covers and socks for fitting and protection.
Instructions for cleaning, drying, and avoiding corrosive contact.
Specifies operating and storage temperature and humidity ranges.
Covers manufacturer recommendations, testing standards, and recommended checks.
To Next Page