OsteoSys SONOST 3000 - Network Interface Specs and Information Flow; SEC.27 Network Interface Technical Specification

User’s Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST 3000 DOC. No. : OT06-2R7124
110
• DICOM connection to other DICOM devices
• Remote service connection via TeamViewer
SEC.27. Network Interface Technical Specification
Connection name
PC Motherboard NIC
Physical network connection type
IEEE 802.3 10/100 / 1000BASE-T
Ethernet
Speed and dual mode support
10 Mbps Half and Full Duplex
100 Mbps Half and Full Duplex
1000 Mbps Half and Full Duplex
Auto configuration (default)
Default IP Settings (Factory
Defaults)
DHCP
IP Address
IPv4
DHCP
The network interface used to connect the device is pre-configured with an IP for use.
Incorrect connection between the network interface used to connect the equipment and
the network interface for network connection may not work.
SEC.28. Network information flow
Flow name
DICOM connection
Device network connection
Motherboard NIC