OsteoSys SONOST 3000 - 4 Maintenance and Repair; 4.1 Resolution to Problems

User’s Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST 3000 DOC. No. : OT06-2R7124
80
4 Maintenance and Repair of SONOST 3000
4.1 Resolution to problems
If SONOST 3000 shows following symptoms, check the system as follows.
Problems
Checking Points
SONOST 3000 is not
activated with the power
on.
Is the device properly plugged?
Isn’t the power cord damaged?
Result of calibration of
the system turns out to
be abnormal
3.4.7DailyTest of SONOST
3000
Result of measurement
turns out to be abnormal
3.3.1 Patient
Measurement
Procedure
3.4.7 DailyTest of
SONOST 3000
Despite measurement
according to the
instructions, its result
turns out to be abnormal
Is the desired part of the body
properly placed?
4.2.1. Cleaning,
Disinfection,
Sterilization
CAUTION !
If you cannot resolve the problem, contact to OsteoSys or your
local authorized dealer.