OsteoSys Co., Ltd.
※ Features and Cautions !
- This device is an ultrasound bone densitometer which has precision error
as follows. (Estimated index in vivo)
T-score -0.5 or more
T-score -0.5 or less
- The equipment must be operated only by, or under supervision of a qualified
person.
- When you give the appropriate commands in SONOST 3000 software,
ultrasonic waves are generated. The generated ultrasonic waves pass through
the Patient’s calcaneus and the electric signal is treated by SONOST 3000
algorithm.
- All operators must understand the potential hazards in the use of medical
electronic devices. They must be able to recognize hazards and protect them-
selves and others from injury.
- The system should be placed at least 20cm from any wall.
- Never remove any system covers.
- In case of changing the printer for other products, check them according to
IEC/EN60601-1-1.
- Unplug the power cord after using.
To Next Page
Loading...
