EasyManua.ls Logo

OsteoSys SONOST 3000 - Page 87

OsteoSys SONOST 3000
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Users Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST 3000 DOC. No. : OT06-2R7124
87
The classification according to standard IEC/EN 60601-I
Type of protection against electric shock : Class I
Degree of protection against electric shock : Type B
Degree of protection against harmful ingress of water : IPX 0
Methods of sterilization or disinfection : See Chapter 4.2.1
Not suitable for use in the pressure of flammable anesthetic mixtures.
4) Check followings while the device is in operation.
A) Whether the product and the patient are normal.
B) Whether the products keep distances with one another.
C) If you find any abnormality related to the product or patient, stop its
operation and check if it can cause any danger to the patient.
5) Checking points after use of product
A) Make sure to clean the product. Deactivate the product and turn the
power off in order.
B) Do not pull the power cord with an excessive force.
C) Comply with followings to keep the product properly.
Avoid places that can wet the product.
Avoid places where air pressure, temperatures and humidity
change drastically and where there are direct ray of sun, dirt, salt
and sulfur.
Do not lean, shake or rock the product.
D) Clean accessories after use.
E) Make sure to clean the product so that users can use it immediately
6) If the product is out of order, do not try to repair it for yourself.
7) Do not attempt to modify product yourself. If any modification is
desired, ask OsteoSys or its authorized dealer for this service.
8) Check, maintenance and repair
9) Cautions in times of transportation of cart

Related product manuals