Operating Instructions
To Operate Your Hand Blender
Connection and Use
1 Your blender is a three-part
assembly. The upper part
contains the motor housing and
the speed buttons. The lower
part contains the Blade housing
or the chopper attachment.
2 To Lock: Hold the motor
housing in the right hand and
the Blade housing or the chop
housing in the left. Attach
the motor housing up to the Blade housing or the
chop housing. Rotate the motor housing to the left.
The assembly locks rmly.
3 To Unlock: Hold the motor housing in the right hand and
the Blade housing or the chop housing in the left. Rotate
the motor housing to the right to separate the units.
4 Place dual purpose lid on the bottom of the
blending/measuring cup for added stability while
blending.
5 Immerse the blade guard completely into ingredients.
6 Hold the hand blender rmly.
NOTE: During blending use, it is normal for suction to
be created at the bottom of the container.
7 When desired consistency has been reached, release
button and lift the blender from mixture. To prevent
splashing, always release button before removing
blender from ingredients.
CAUTION: To extend the life of this appliance, never let
it operate continuously for more than 1 minute at a time.
After 1 minute of continuous operation, release button
and let appliance rest for 3 minutes before using it again.
WARNING: Do not use hand blender in saucepan directly
on stovetop. Remove pan from heat before blending.
Blending Cup / Measuring Cup Information
• Thelidcanbeeasilyusedasacoverforstorage.
• Foraddedstability,usethedualpurposelidonthe
base of the Blending Cup.
• Thecupwhichisincludedwithyourhandblender
functions as a blending cup, a measuring cup and
can also be used for storage.
Measuring Chart for Blending Cup
Milliliters Cups Ounces
50 .21 1.70
100 .42 3.40
150 .63 5.00
200 .85 6.76
250 1.10 8.50
300 1.25 10.00
350 1.50 12.00
400 1.70 13.50
450 1.90 15.25
500 2.10 17.00
550 2.32 18.50
600 2.50 20.25
650 2.75 22.00
700 3.00 24.00
5 6
Tight Loose
To Next Page
Loading...
