CARE & CLEANING - GRINDER
Cleaning & Unblocking Grinder Burrs,
Collar, Grind Chamber and Outlet
• 1-2 Months
If the Grinder is used frequently (everyday),
the Burrs need to be cleaned to ensure
best performance of the integrated Grinder.
Regular cleaning helps the Burrs achieve
consistent grinding results, which is especially
important when grinding coffee beans for
espresso.
• Grind Off Excess Coffee Beans
-
The machine is on and in the READY state.
- Make note of the current Grind Setting
(to use as the starting point after cleaning).
- Insert Two Cup Filter Basket into the Group
Handle.
- Insert Group Handle into Grinding Cradle.
- Turn Bean Hopper fully anti-clockwise to
close the Hopper Gates and unlock the
Bean Hopper. The Bean Hopper will pop up
slightly.
- Place your hand on top of the Bean Hopper
and push down lightly.
At the same time push down the Group
Handle to activate the Grinder. Continue
grinding until no more coffee grinds are
emitted from the Grinder.
- Remove the Group Handle and dispose of
the waste grinds as these will be too coarse
for espresso coffee.
- Remove the Bean Hopper from the Grinder
Collar and store any remaining coffee beans
in an airtight container to preserve their
freshness.
• Preparing to Clean
- Turn off the machine, switch off & unplug at
power outlet.
CAUTION: Care should be taken when cleaning
Grinder Burrs as they are sharp.
• Cleaning Top Burr
- Fold the two handles up and lift the Top Burr
from the Grinder Collar.
- Wash the Top Burr in warm soapy water with
a mild detergent, rinse & dry.
Note: Spots & marks on the surface of the
Burrs are part of the hardening process (for
extra-long life). These marks do not affect the
performance of the Grinder or the taste of the
espresso.
• Cleaning & Unblocking Bottom Burr and
Grind Chamber
- Use the Cleaning Brush or a Vacuum
Cleaner to thoroughly clear the parts and
surfaces in the Grind Chamber of ne coffee
grinds. A damp cloth can be used to wipe the
inside of the Grind Collar.
- Allow thorough air drying.
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
TWO CUP
PRESS & HOLD 4 SEC
PRESS & HOLD 4 SEC
ONE CUP
OR
TWO CUP
PRESS & HOLD 4 SEC
COLADO MANUAL COLADO MANUAL
PRESS & HOLD TOGETHER 4 SEC
MAX
2.8 L
1 L
MIN
20-22g13-15g
COLADO MANUAL
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
BARISTA MAX
GRINDER
MANUAL SHOT
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
English - 27
BVSTEM7300-054_19ESM4 (LA).indd 27 6/26/19 09:34
To Next Page
Loading...
