Oster BVSTEM7300 - Grinder Burrs & Chamber Cleaning

CARE & CLEANING - GRINDER
Conical Burrs are used to grind coffee beans to
a suitable size for espresso extraction. Deposits
of grinds & oils build up over time, affecting
the taste of the espresso & operation of the
integrated Grinder.
Cleaning Grinding Cradle & Grind Outlet
• Weekly
Remove any coffee grinds from the Grinding
Cradle & Grind Outlet with the Cleaning Brush
and wipe with a damp cloth, wipe dry.
Cleaning the Bean Hopper
• 2-3 Months
If the Grinder is used frequently (everyday),
the Bean Hopper needs to be cleaned to
ensure best performance.
CAUTION: To prevent damage to the appliance
do not use alkaline cleaning agents, abrasives
or metal scourers.
WARNING: Do not immerse the machine
in water.
• Preparing to Clean Bean Hopper
- Turn off the machine, switch off & unplug at
power outlet.
- Make note of the current Grind Setting
(to use as the starting point after cleaning).
• Remove and Clean Bean Hopper
- Turn Bean Hopper fully anti-clockwise, to
close the Hopper Gates and unlock the Bean
Hopper.
- Remove the Bean Hopper from the Grinder
Collar and store any remaining beans in an
airtight container to preserve their freshness.
- Wash the Bean Hopper in warm soapy water,
then rinse & dry. Let the Bean Hopper stand to
allow thorough air drying before replacing.
• Replace Bean Hopper
- Ensure the Grinder Collar is clear of coffee
beans or grinds.
Note: Coffee grinds caught under the Top Burr
may prevent the Bean Hopper from seating
correctly. If this happens grind off excess coffee
beans, see page 27-28.
- Ensure the Hopper Guide is aligned with the
vertical white lines on the Hopper base.
- Align & insert the Bean Hopper into the
Grinder Collar and rmly pushing down turn
clockwise to lock into place and open the
Hopper Guide.
- Reset to the Grind Setting noted prior
to cleaning.
Note: After cleaning, the optimum Grind Setting
may have changed. To nd the optimum Grind
Setting use the information on pages 13-14.
BARISTA MAX
GRINDER
MANUAL SHOT
BARISTA MAX
GRINDER
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
S
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
BARISTA MAX
GRINDER
MANUAL SHOT
BARISTA MAX
GRINDER
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
S
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
BARISTA MAX
GRINDER
MANUAL SHOT
BARISTA MAX
GRINDER
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
S
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
BARISTA MAX
GRINDER
MANUAL SHOT
BARISTA MAX
GRINDER
GRINDER
OUTLET
MOLINILLO
PRESIONAR Y MANTENER
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
REMOVE
TURN
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
CLEAR OF
COFFEE BEANS
& GRINDS
S
PUSH DOWN
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
TOP COVER
GRINDER
COLLAR
HOPPER
GUIDE
MOLINILLO
PRESIONAR Y MANTENER
English - 26
BVSTEM7300-054_19ESM4 (LA).indd 26 6/26/19 09:34