7
11. The Power Cord, Control Panel and Power Strip should never be immersed in water
or other liquids. Gently clean the outer surface of the Control Panel with a damp cloth
containing mild soap solution or plain water.
12. Ensure that both the Lid and Oil Reservoir are completely dry after washing and
before use.
13. Assemble the Fryer
- Insert the Power Strip
- Insert the Oil Reservoir
- Insert the Control Panel Assembly
- Insert the Condensation Trap
- Replace Frying Basket
- Replace Filters and Filter Cover
- Insert and close Lid
REPLACING AND
CLEANING FILTERS
NOTE: Replace Filters every 3 months or after every 12 uses.
1. Open the Filter Cover and remove filters.
2. White Grease Filter may be washed in hot soapy water. Allow to air dry.
3. Charcoal Odor Filters are not meant to be washed. It is recommended to replace
every 3 months or after every 12 uses.
4. Place the Filter Cover in the dishwasher. Dry thoroughly after cleaning.
5. Place clean White Grease Filter in first, followed by the Charcoal Odor Filter. Then
replace the Filter Cover.
To Next Page
Loading...
