5. Press the ON/OFF power button to turn the product off. This product is pre-programmed to turn off automatically
if not used for a period of several minutes. All lights will turn off when the unit automatically powers down.
Using the Manual Controls
The Manual Controls include:
Low
Med
High
Pulse
Stop
Use these controls for personal recipes or to continue blending after a Programmed Setting is finished.
1. Press the ON/OFF power button to turn the product on. The power light will blink, meaning the product is active
and ready to use. The light will stay on when the motor is running.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.
Using High
1. Press the “High” button to run the product at a high speed.
2. Press the “Stop” button to cancel the operation at any time.
3. Press the ON/OFF power button to turn the product off.
Using the Medium
1. Press the “Medium” button to run the product at a medium speed.
2. Press the “Stop” button to cancel the program at any time.
3. Press the ON/OFF power button to turn the product off.
Using the Low
1. Press the “Low” button to run the product at a low speed.
2. Press the “Stop” button to cancel the program at any time.
3. Press the ON/OFF power button to turn the product off.
Using the Pulse
1. Verify that the blue light is blinking. This indicates that the blender is turned on.
2. Press and release the “Pulse” button.
3. Release the pulse button to stop.
4. Press the ON/OFF power button to turn the product off.
Use pulse button to crush ice or chop food.
Caring for Your Product
After Use
1. Press the OFF button and unplug blender. Lift the jar straight up from the base, remove the lid and empty the
jar.
2. If necessary, use a rubber spatula to scrape foods away from the sides of the jar.
Cleaning
WARNING: Blades are sharp. Handle carefully.
CAREFULLY release the blade from the bottom of the jar by turning the threaded jar bottom counterclockwise. The
jar lid, filler cap and blade are dishwasher safe. Use the top rack of the dishwasher for the jar lid, filler cap, and blade.
Place sealing ring into bottom basket of dishwasher.
To Next Page
Loading...
