1. Turn unit “OFF” and unplug Motor Base.
2. Always wait for the S Blade or Slicing/Shredding Disk to stop spinning.
3. Remove Food Processor Accessory from Motor Base.
4. Turn Cover clockwise to remove from Bowl.
5. Remove S Blade or Disk carefully. Be careful not to let Blade or Disk fall out of the container. The cutting edges
are very sharp. Scrape any remaining food from the Blade and Processing Bowl.
6. Unlock Bowl from Adaptor by turning Bowl clockwise.
Cleaning
Unplug Motor Base Before Cleaning.
WARNING: Do Not Immerse Adaptor in Water. Always Remove Adaptor from processor Bowl Before cleaning.
Keep S Blade and Disk out of the reach of children. Store the S Blade and Disk in the Bowl or in a convenient, safe
location when not in use. This Blade and Disk should be treated with the same caution as a sharp knife.
Remove stains caused by processing large amounts of carrots or similar vegetables with baking soda. Rinse stained
parts in water and sprinkle with baking soda. Rub with a soft, damp cloth. Rinse and dry. Do not use abrasive
cleaners on any parts.
Maintenance
This unit is designed with a safety interlock. The interlock requires that the Cover be in place before the blade will
rotate. (The interlock does not control operation of the Motor.) To ensure that the interlock is operating correctly, hold
the Adaptor and rotate the Drive Shaft several turns. The metal Star Drive on the bottom of the Adaptor should NOT
turn. If it does turn, DO NOT USE. Return the unit to an authorized service facility for repair. DO NOT USE THE
INTERLOCK FEATURE AS A SUBSTITUTE for turning the power unit “OFF” and unplugging the power unit before
disassembling and cleaning. Never put S Blade on Adaptor without Processor Bowl. Do not operate if the flexible
seal is damaged or missing. The safety interlock could become jammed.
Processing Tips
1. Cut all fruits and vegetables, cooked meats, fish, seafoods and cheeses into pieces 1 inch or smaller.
2. Do not exceed the quantities indicated in the Food Processing Charts.
3. Always hold hand firmly on the Cover when starting and running Motor.
4. Do not process hot liquids or frozen foods.
5. Do not process whole spices (except peppercorns) such as nutmeg or cinnamon. They may cause damage to
the surface of the Processor Bowl.
6. Process the hardest foods first, using only a few Fast Pulses to begin chopping. Add more delicate foods and
continue to process using the Fast Pulse technique. The harder foods will continue to be chopped along with
the softer foods.
7. Processing of Parmesan cheese, dried dates or other extremely hard foods is not recommended. If a knife
cannot easily pierce the food, it should NOT be processed in the Food Processor Accessory.
8. The Food Processor Accessory is not designed to whip cream, whip egg whites or process dough. Use a
standard mixer for those tasks.
9. If liquid leaks from Cover, there is too much liquid in the recipe. Adjust the liquid level to prevent leakage.
10. The temperature of cheese will affect how it processes. Cheese for spreads should be at room temperature for
To Next Page
Loading...
