EasyManua.ls Logo

OSTO AST-303 - User Manual

OSTO AST-303
6 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction Manual
Wireless Massage Pad
How to care for Gel Sheets
If the adhesive surface of the gel sheet becomes dirty and fails to sck properly,
care for it according to the instrucons below:
• Get some drops of water on your fingerps and rub the adhesive surface (gel
surface) and remove any dirt.
• Shake off as much water as you can and leave it adhesive (gel side) face up to
air-dry in a well-venlated, shaded locaon.
• Allow to air-dry unl there is no moisture on the surface and then affix the
product to the storage sheet.
• Do not clean it for a long me or too frequently. Doing so may damage the
adhesive surface (gel side) and shorten its life.
Valid for warranty 1 year after the date of purchase:
Purchase Date:
Ordering from(Amazon/1688/eBay/Ali Express/DH gate/OSTO Web):
Order #:
Item Model:
Customer Info(Name/Tel/Add):
Description:
AST-303
Shenzhen OSTO Technology Co.,Ltd
Address:No.43,Longfeng Road,
Xinsheng community,Longgang District,
Longgang Street,Shenzhen City,China.
EC REP
Wellkang Ltd
Address:Suite B,29 Harley Street,London W1G 9QR,England,UK
2020-08
100 mm
147.0 mm

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the OSTO AST-303 and is the answer not in the manual?

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
  4. Maintenance Features
  5. Precautions

The OSITO Wireless Massage Pad, model AST-303, is a device designed for body massage via electrical stimulation. It is not classified as medical equipment. The device offers 10 modes and 25 intensity levels for a customizable massage experience.

Function Description:

The massage pad utilizes electrical stimulation to provide massage to various parts of the body. It is designed to perfectly fit body curves, allowing users to focus on specific areas for exercise or relaxation. The device is portable, enabling use at any time or place. It incorporates light and durable silk screen printing for effective current conduction to the patch. The soft rubber patch ensures good adhesiveness without being gooey, distributing current evenly to the body.

Important Technical Specifications:

  • Modes: 10 modes in total (1 automatic mode + 9 manual modes).
    • Automatic Mode (M0): Each mode works for 1 minute, then automatically changes to the next mode, circulating through all modes.
    • Manual Modes (M1-M9): Users can manually adjust between modes 1 to 9.
  • Intensity: 25 levels, adjustable from 00 to 25.
  • Power Source: The main machine is rechargeable via a USB cable. A full charge takes approximately 60 minutes and lasts for no less than 100 minutes.
  • Gel Sheets: Consumable items that require replacement when conduction performance decreases, adhesiveness is lost, or the surface is dry, gouged, or dirty.

Usage Features:

  • Installation:
    1. Take a pad out of its bag.
    2. Install the main machine onto the pad, aligning the electrode button with the electrode hole.
    3. Remove the film from the gel pad.
    4. Attach the pad with the main machine to the desired body area.
  • Mode Programming:
    1. Upon turning on, the device starts in automatic mode (M0).
    2. Press the 'ON/OFF' button to cycle through the modes (one press for M1, two presses for M2, and so on).
    3. After selecting a mode, use the '+' and '-' buttons to adjust the intensity levels (00-25).
  • Frequency and Intensity of Using:
    • Use once per day per area.
    • Start with a weak intensity level for the first time, then adjust as desired once accustomed.
    • Ensure the product is attached to the skin before turning on. Wipe off any sweat from the area to be used.
    • Minimize touching the adhesive (gel surface).
    • Ensure the gel sheet is fully adhered to the skin; gaps can cause uneven electricity flow and strong stimulus or pain.
  • Turning On/Off:
    • The power indicator lights up when the device is turned on, indicating normal operation.
    • To turn off, press the power off button on the main machine. The indicator lights turn off, and the power is off.
    • The device will automatically shut off within 120 seconds after switching if no operation is performed.
  • Removing the Product:
    • Always turn off the power before peeling off the product from your body.
    • Touch the adhesive (gel surface) as little as possible.
    • After use, stick the product back to the storage sheet, then place it in the storage bag. If dust or dirt sticks to the gel sheet, it may not stick properly, and electrical stimulation may weaken, or pain/burns may occur.
    • If any gel fragments remain on the skin, wipe them off completely.

Maintenance Features:

  • Cleaning the Product:
    • Ensure the power is off before cleaning to avoid electrical stimulus.
    • Do not rinse the product with water.
    • Do not wipe the product with paint thinner, benzene, or alcohol.
    • Wipe off any sweat or moisture gently with a soft cloth to avoid scratching.
    • If dirty, wet a cloth with lukewarm water diluted with 3-5% detergent, wring it out well, and wipe off dirt. Rinse the cloth with water, wring it out, and wipe off any detergent.
    • Let it air-dry in a well-ventilated, shaded place.
  • Handling Gel Sheets:
    • Keep away from direct sunlight, heat, and humidity. Store in a cool, dark place.
    • Do not leave gel sheets out or store them with anything dirty. Dirty gel sheets may lose adhesion, weaken electrical stimulation, or cause pain/burns.
    • Cleaning gel sheets helps them last longer (typically after 25-30 uses).
    • If a gel sheet gets stuck to clothing, moisten the other side of the cloth to remove it easily.
    • Do not use damaged, deteriorated, or dirty gel sheets.
    • Do not bend or fold the gel sheet.
    • Ensure hands are clean when handling gel sheets.
  • Storage:
    • Attaching to the storage sheet: Do not allow gel sheets to touch each other. Do not press gel pads too hard on the protective sheet. Do not bend the storage sheet.
    • Putting inside the storage bag: Keep the storage sheet and bag clean. Avoid hot or humid locations (e.g., inside a car) and direct sunlight. Keep in a safe place, out of reach of children and pets. Do not place near fire.
    • If not used for a long time (1 month or more), charge the unit at least once to prevent battery life shortening.
  • Disposal: Dispose of according to local government regulations. Dispose of the product if cuts or cracks develop after extended use.

Precautions:

  • Consult a doctor if experiencing skin or body abnormalities.
  • Avoid using at very high levels or for prolonged periods to prevent muscle fatigue, tingling, or redness.
  • Remove jewelry or accessories before use.
  • Keep electronic devices away from the body during use.
  • Do not heat or cool the product before use.
  • Do not use in conditions with sudden temperature changes (e.g., pouring hot water, sauna).
  • Do not use with implanted medical devices (pacemakers), life-sustaining medical equipment (heart-lung machines), or wearable medical devices (EKGs).
  • Avoid use by individuals with heart disease, pregnant or recently given birth women.
  • Consult a doctor if prone to allergies, fever (38°C or above), impaired perception or skin problems (infection, inflamed skin, scratches), needing rest, acute painful conditions (spine fracture, sprain, pulled muscle), blood flow blockage, taking medications, bone disorders (osteoporosis), cranial nerve issues (epilepsy), abnormal blood pressure, heart or cranial nerve abnormalities, skin irritation from gel sheets, specific physical abnormalities, peripheral circulatory disorders (diabetes), or receiving medical treatment.
  • Do not use on areas around the heart (chest, shoulder blade), neck up (head, face), wounds, mucous membranes (eyes, mouth, genitals), areas with recent depilation or plastic surgery, areas with metal/plastic/silicone implants, spinal column, tattooed areas, or abdomen during menstruation.
  • Keep button battery and cover out of reach of children.
  • Do not disassemble, modify, or attempt repairs.
  • Avoid shocks (dropping, hitting).
  • Do not touch metal electrodes when power is on.
  • Do not use with other electrical devices or beauty equipment.
  • Do not heat the product or gel sheet in a microwave.
  • Do not use on young children or pets.
  • Do not spill liquids on the product.
  • Do not use while exercising or driving.
  • Do not use in humid locations (bathroom).
  • Stop use and consult a doctor if experiencing pain, discomfort, rough/dry skin, rash, redness, itching, burns, inflammation, or abnormal situations.
  • Do not share with others.
  • Turn off immediately if a strange smell, noise, or foreign matter (water) enters the device.
  • If the button battery leaks, stop use and contact the distributor. If liquid gets in eyes, rinse with water for at least 1 minute and contact a doctor. If liquid gets on skin or clothes, rinse with water immediately.
  • Install the button battery correctly.
  • Remove the button battery immediately when it runs out.

OSTO AST-303 Specifications

General IconGeneral
BrandOSTO
ModelAST-303
CategoryMassager
LanguageEnglish

Related product manuals