Mode and Intensity
In total 10 modes, 25 levels of intensity.
1. Mode: in total 10 modes (1 automac mode + 9 manual modes).
(1). Automac mode (M0): Each mode work 1 min, and change to the next mode
automacally, and later circulang like this.
(2). Manual mode (M1-M9): you can adjust from 1 to 9 mode, manually change
from one mode to another.
2. Intensity: in total 25 levels, can be adjusted between 00~25.
How to program the different modes.
1. When you turn on the main machine, it is the automac mode at first. Just press
the ‘ON/OFF’ buon to adjust the modes. When you press once, it is mode 1, press
double mes, it is mode 2, pressing like this to adjust the modes.
2. Aer you confirm the mode, just press ‘+’ and ‘–’ buon to adjust the levels of
intensity. You can adjust the intensity in each mode.
Frequency and intensity of using
Important
• Use once per day and per area used, use a weak level when using it for the first
me, once you are used to a weak level, adjust the level as desired.
1. Aach the product to the area where you wish to use it.
• Wipe any sweat off the area to be used before aaching.
• Touch the adhesive (gel surface) as lile as possible.
• Sck the gel sheet to your skin, if there is a gap where it is stuck on, electricity
will not flow uniformly across the enre surface of the gel sheet and you may feel
a strong smulus or pain.
Usage Instrucons
Gel sheets are consumables, replace with a new sheet at the following mes
• Obviously feel the conducon performance decreased, cause decreased
strength.
• When it loses its adhesiveness, the adhesive surface (gel) dries out or is gouged
or dirt/grime that cannot be removed exists.
1. Take a pad out of the bag.
2. Install main machine on the pad. The electrode buon is aligned with the
electrode hole of the main machine.
3. Remove the film on the gel pad.
4. Aach the pad with the main machine to your body.
Features
In view of the massage needs from different parts of the body, perfect fit the body
curve, focus your aenon on the locaon of the need to exercise more.
Is not affected by me or place, no maer when and where you can follow one's
inclinaons of exercise.
Using light and durable silk screen prinng, the current effecve conducon to
patch
Aached with a type of so rubber patch, good adhesiveness, not gooey, current
can be evenly to the body.
ON/OFF ON/OFF
Turning the power ON
Indicator
Turn the
power on
Important
• If a gel sheet is not in contact with the skin, do not turn it on. Doing so may cause
injury or burns.
When the power is switched on, the indicator is light and it is regarded as the
normal working state.
- 5 - - 6 -