OTbeat Burn - LED Guide
LED Guide:
Heart Rate Detection LED Indication:
Alternating BLUE and GREEN: Detecting heart rate
Alternating BLUE and RED: No heart rate detected
Blinking GREEN: Heart rate detected
Blinking ORANGE: Heart rate zones are changing
Bluetooth Connection State:
Blue LED blinks for 5 seconds: After turning on the unit
Blue LED continuously on for 5 second: Connected
Green LED on for 2 seconds: Connected (HR not detected)
Green LED continuously on: Updating firmware
Page 9
Battery LED Light
During Charging:
Red LED blinks slowly: Charging
Green LED continuously on: Battery full
Battery State:
Red LED blinks three times: Low battery at <15% (repeat every
5 min. until reach critical level)
Red LED continuously on for 2 sec: Device powering off
To Next Page
Loading...