OTC 3209 - Diagnostic Functions; Vehicle Diagnostics; I;M Monitors; Read Codes

4. 1 Diagnostic Functions
Vehicle Diagnostics
Use this function to select a vehicle and then proceed to the Diag-
nosticMenu.
I/M Monitors
Displaysasnapshotofthestateofthevehicle’sOBDIIMonitors.
Read Codes
Reads DTCs from vehicle’s computer with KOEO or KOER.
Erase Codes
Deletes DTCs from vehicle’s memory.
MIL Status
DisplayswhethertheMalfunctionIndicatorLampisonoroff.
State OBD Check
Displays a basic status of the vehicle’s OBD system.
View Data
ViewsvehicleParameterIdenticationData(PIDs)inrealtime.PIDs
are displayed in either a text format or graph format when available.
Record Data
Records vehicle PIDs while vehicle is parked or being driven. This
function is for diagnosing intermittent driveability problems.
View Freeze Data
Displays a snapshot of operating conditions at the time of a fault.
Drive Cycle Monitor
Displaysthecurrentstateofthevehicle’sOBDIIMonitorsinReal-
Time.
O2 Monitor Tests
TheO2MonitorTestsisNOTanON-DEMANDTEST.ThisFunction
displays oxygen sensor monitoring test results from the vehicle’s
memory.
Diagnostic Monitor Tests
Reads test results for emission related powertrain components and
systems that are and are not continuously monitored.
Quick Start Guide
|
OTC3209
|
en
575516 REV A | 05.2015 Bosch Automotive Service Solutions Inc.