Need help?Do you have a question about the OTC 3209 and is the answer not in the manual?
General| Brand | OTC |
|---|---|
| Model | 3209 |
| Category | Measuring Instruments |
| Language | English |
Explains how menus and lists operate on the scan tool, covering navigation keys.
Describes the meaning and function of various icons displayed on the scan tool screen.
Provides guidance on finding the vehicle's OBD II Data Link Connector (DLC).
Details the step-by-step procedure for connecting the scan tool to the vehicle's DLC.
Use this function to select a vehicle and then proceed to the Diagnostic Menu.
Displays a snapshot of the state of the vehicle's OBD II Monitors.
Reads DTCs from vehicle's computer with KOEO or KOER.
Deletes DTCs from vehicle's memory.
Displays whether the Malfunction Indicator Lamp is on or off.
Displays a basic status of the vehicle's OBD system.
Views vehicle Parameter Identification Data (PIDs) in real time.
Records vehicle PIDs while vehicle is parked or being driven for diagnosing problems.
Displays a snapshot of operating conditions at the time of a fault.
Displays the current state of the vehicle's OBD II Monitors in Real-Time.
Displays oxygen sensor monitoring test results from the vehicle's memory.
Reads test results for emission related powertrain components.
Scan tool controls the operation of vehicle components, tests or systems.
Displays the vehicle's VIN, Calibration ID(s), CVN, and readiness monitors.
Allows review of data stored in Scan Tool.
Five-digit alphanumeric codes that help determine the cause of vehicle problems.
Plays back a recording allowing viewing of previously-recorded PIDs.
Looks up definitions of DTCs stored in Scan Tool.
Changes tool settings, displays tool information, and performs tool self-tests.
Changes measurement units.
Allows the user to change the language used by the tool.
Enables/disables scrolling of the complete PID name on the display.
Allows viewing of specific tool information for customer service.
Used to check the display.
Verifies that the keys are working correctly.
Checks RAM and Flash ROM.
Used for updating the Scan Tool.
Monitors the voltage present on pin 16 of the OBD II Data Link connector.
Allows the user to view acronyms and abbreviations used by the Scan Tool.
Displays a list of components and their locations on the vehicle.
To Next Page
