OTC 3209 - Display Test; Keypad Test; Memory Test; Program Mode

Display Test
Used to check the display.
Keypad Test
Veriesthatthekeysareworkingcorrectly.
Memory Test
ChecksRAMandFlashROM.
Program Mode
Used for updating the Scan Tool.
Charging System Monitor
Thisfunctionisusedtomonitorthevoltagepresentonpin16ofthe
OBD II Data Link connector.
Acronyms
Allows the user to view acronyms and abbreviations used by the
Scan Tool.
Component Locator
Tool will display a list of components and their locations on the
vehicle.ThisfunctionwillalwaysappearontheMainMenu.This
selectionwillappearontheDiagnosticMenuonlywhenthetoolhas
a list of component locations for the currently selected vehicle.
Quick Start Guide
|
OTC3209
|
en