25
E
Finishing examples for dry grinding
● Roughly pre-finished work pieces or strongly scratched surfaces
Fill 1.5 litres H2/100 (coarse walnut-shell granule impregnated with
grinding paste) into the process-container. Set the finishing time by
turning the timer in a clockwise direction. The machine starts
automatically.
Finishing time: 2 – 4 hours, depending on the condition of the surface.
Now use the fine walnut-shell granule (HN1/500) for approx. 1 – 3 hours.
Please note: When dry grinding in the ECO-mini, you should have a
second container, as constantly changing between grinding
and polishing material causes the container to become
dirty, as a result of which the required effect can no longer
be achieved.
Finishing Process
To Next Page
Loading...