21
E
Use and Function of the Machine
Work pieces
The ECO-mini “dry” is especially suitable for the following work pieces:
● Rings, even with zircons, precious stones, amber, plastics or pearls
● Necklaces larger than 4 mm (thinner necklaces can be tangled up)
● Earrings ● Brooches ● Pendants
Please note:
● Never process more than 100 g of goods at one time. Although you can
process maximum quantities of work pieces with a round shape, e.g. rings,
you may find that work pieces with large, flat areas or edges can get
“dinged”.
● Always close all necklaces before processing, as otherwise these can get
tangled up very easily.
● Never process any work pieces together whose individual weight exceeds
8 grams. Larger pieces such as bracelets should be processed individually.
● Gold and silver alloys can also be processed together. Gold-plated goods
should never be polished for longer than 30 minutes in HN1/500.
● Labels do not need to be removed for the polishing process, but there is
the danger that these can wear off and/or the area to which the label is
fastened may not be polished properly.
The following work pieces are unsuitable for the ECO-mini “dry”:
● Colliers
● Chains, thinner than 4 mm
● Hollow chains (can get squashed)
● Work pieces smaller (thinner) than 1 mm should not be processed in the
ECO-mini “dry”. They can get jammed under the plate.
● Jewlery with loose stones, clasps, broken links, etc.
To Next Page
Loading...