oticon BTE Nera2 Pro Ti - Thin Tube with Micro Mould or Litetip; Clean Micro Mould or Litetip

34 35
About Startup Handling Options Tinnitus Warnings More info
LiteTipMicro mould
Thin tube with Micro mould or LiteTip
Read the following pages if you have a Micro mould or LiteTip
earpiece. Micro mould and LiteTip are customised for your ear shape.
Wax lter
Clean Micro mould or LiteTip
The earpiece should be cleaned
regularly.
The wax lter in the earpiece
should be replaced when
clogged or when the hearing aid
does not sound normal.
The vent is cleaned
by pressing the brush
through the hole,
twisting it slightly.
Vent
IMPORTANT NOTICE
Always use the same type of wax lter as was originally supplied with the
hearing aid. If you are in any doubt about the use or replacement of wax
lters, contact your hearing care professional.