24 25
DAI (Direct Audio Input)
If your hearing instrument is connected by means of a DAI adaptor with an external
sound source, like a media player/MP3 or hand mic, the signals of these devices will
be directly transferred to your hearing instrument.
Mounting of the DAI adaptor
Start by opening the battery door and slide the DAI adaptor
onto the instrument.
Then insert the DAI cord into the adaptor.
When the DAI adaptor is connected, the instrument will
automatically switch to a combination of a DAI program
and the microphone input of the instrument.
If you would like the DAI program alone, you can switch to the next program by using
the program switch button.
As long as the DAI adaptor is connected to the instrument, two programs will automatically
be added after the standard programs which have been programmed into your hearing
instrument by your Hearing Care Professional.
Instrument
DAI cord
connector
DAI adaptor
IMPORTANT NOTICE
When the DAI is connected to mains-operated equipment, this equipment must
comply with IEC-60065, IEC-60601 or equivalent safety standards.
To Next Page
Loading...
