oticon FittingLINK 3.0 - Pairing Fittinglink 3.0 with 2.4 Ghz Wireless Hearing Aids

14
About Startup Daily use Warnings More info
Pairing FittingLINK 3.0 with 2.4 GHz wireless
hearing aids
1. Turn on your PC
2. Open Genie 2
3. Attach speakers to the hearing aids
4. Insert new batter-
ies in the battery
drawer on the
hearing aids.
5. Place the hearing aids and FittingLINK 3.0
within range. See the “Operating range while
pairing” section.
Up to 30 cm