20
About Startup Daily use Warnings More info
Troubleshooting
Locations where Bluetooth technology is not allowed
FittingLINK 3.0 must not be used in locations where Bluetooth
technology is not allowed. Please note that FittingLINK 3.0 is only
active when the LED indicator is on, i.e. when used by Genie 2.
Interference
Please note that active programming devices and wireless devices
in general may create interference. If you experience decreased
performance, relocate FittingLINK 3.0 or turn off the possible
sources of interference.
The PC cannot find the driver for FittingLINK 3.0
Genie 2 must be installed before the PC can find and install the
driver for FittingLINK 3.0. After installing Genie 2, re-connect
FittingLINK 3.0 to your PC and let the driver installation finish
before you proceed.
To Next Page
Loading...