28
About Startup Daily use Warnings More info
FittingLINK 3.0 contains a radio
transceiver using Bluetooth Low
Energy (BLE) and a proprietary short
range radio technology both working
at 2.4 GHz. The 2.4 GHz radio trans-
mitter is weak and always below +8.0
dBm EIRP in total radiated power.
FittingLINK 3.0 complies with
international standards concerning
electromagnetic compatibility and
human exposure.
Due to the limited space available
on FittingLINK 3.0 relevant approval
markings can be found in this booklet.
Additional information can be found
in the Technical Data sheet on
www.oticon.global
USA and Canada
This device is certified under:
FCC ID: DMOCBBSKE
IC: 2099D-BTD800
This device complies with Part 15 of
the FCC Rules and with Industry
Canada’s licence-exempt RSSs.
Operation is subject to the following
two conditions:
1. this device may not cause harmful
interference, and
2. this device must accept any inter-
ference received, including inter-
ference that may cause undesired
operation.
Changes or modifications not
expressly approved by the party
To Next Page
Loading...