64
About Start-up Handling Options Tinnitus Warnings More info
Connection to external equipment
The safety of the use of hearing aids
when connected to external equipment
(with an auxiliary input cable and/or
USB cable and/or directly), is
determined by the external signal
source. When connected to external
equipment plugged into a wall outlet,
this equipment must comply with IEC
62368-1 or equivalent safety
standards.
Use of third-party accessories
Only use accessories, transducers or
cables supplied by the manufacturer.
Non-original accessories may result
in reduced electromagnetic compati-
bility (EMC) of your hearing aids.
Modification of hearing aids is not
allowed
Changes or modifications not expressly
approved by the manufacturer will void
the warranty of the equipment.
Interference
The hearing aid has been
thoroughly tested for interference
according to the most stringent
international standards.
Electromagnetic interference may occur
in the vicinity of equipment with the
symbol to the left. Portable and mobile
RF (radio frequency) communications
equipment can affect the performance
of the hearing aid. If your hearing
aid is affected by electromagnetic
interference, move away from the
source to reduce the interference
To Next Page
Loading...
Need help?
General
