OtterBox ALPHA GLASS User Manual

A
LPHA GLASS
Install Guide for Galaxy S9 & Galaxy S9+
1. Remove case (if applicable)
2. Remove any screen films, clean screen
with alcohol wipe, dry with microfiber cloth
3. Slide each installation tool all the
way onto top and bottom of phone
5. Align glass to top installation tool
with speaker cutout as guide
6. Lay glass down until aligned with bottom installation
tool, then press around all edges. Remove tools.
7. Install case per manufacturer instructions
(if applicable). Note: for best results, place
bottom end of phone into case first.
4. Peel off adhesive backing

OtterBox ALPHA GLASS Specifications

General

Material	Tempered Glass
Type	Screen Protector
Compatibility	Varies by device model (e.g., iPhone, Samsung Galaxy)
Features	Scratch-resistant
Installation	Easy
Hardness	9H
Oleophobic Coating	Yes

Summary

Alpha Glass Installation Guide

Prepare Phone: Remove Case

Ensure the phone case is removed before proceeding with installation if applicable.

Clean and Prepare Screen

Remove existing screen films and clean the phone screen with an alcohol wipe and microfiber cloth.

Install Alignment Tools

Slide the installation tools onto the top and bottom edges of the phone.

Remove Adhesive Backing

Carefully peel off the adhesive backing from the Alpha Glass protector.

Align Glass to Top Tool

Align the Alpha Glass to the top installation tool, using the speaker cutout as a guide.

Position and Secure Glass

Lay the glass down, align with the bottom tool, press edges, and remove tools.

Install Case

Install the phone case according to manufacturer instructions, placing the bottom end first.

Customer Service Contact

Otter Products Alpha Glass Warranty