OtterBox Defender Series User Manual

1
Unwrap the elastic band and fold the folio open.
2
Grab the spine of the folio and slide to one side
until it releases.
3
Peel away and remove the outer slipcover from
the shell.
4
Separate the shell halves by locating the arrows
and releasing each snap along all four sides.
5
Place your device into the bottom half of the shell.
6
Place the shell top on the device and snap the
two case pieces together along all edges.
Defender Series
Folio Case

OtterBox Defender Series Specifications

General

Material	Polycarbonate shell, synthetic rubber slipcover
Compatibility	Varies by model (specific to phone models)
Features	Port covers, belt clip holster
Device Compatibility	Varies by model (e.g., iPhone, Samsung Galaxy, Google Pixel)
Protection Features	Drop protection, dust protection
Drop Height	Up to 4 times military standard (MIL-STD-810G 516.6)
Belt Clip Holster	Optional, some models include it
Antimicrobial Technology	No
Color Options	Varies by device model
Weight	Varies by device model
Dimensions	Varies by device model
Layers	3 (polycarbonate shell, synthetic rubber slipcover, built-in screen protector)
Wireless Charging Compatibility	No (varies by model, check product details)

Summary

Defender Series Folio Case Installation Steps

Initial Case Preparation

Unwrap the folio, release the spine, and separate the shell halves for device insertion.

Device Insertion and Shell Securing

Place the device into the bottom shell half and snap the top shell piece onto the device.

Finalizing Case Assembly

Slipcover and Folio Reattachment

Align and secure the slipcover around the shell, then reattach the folio by sliding it into place.

Pencil Loop Note

Guidance on reattaching a detached pencil loop before applying the slipcover.