OtterBox PURSUIT Series User Manual

Customer Service
1-855-688-7269 / USA + Canada - Toll Free
support@otterbox.com / otterbox.com/support
STEP 1.
Locate notch along front side.
Open seal along edge with finger.
Use two fingers to grab lid at notch
and pull it away from base.
STEP 2.
Slide phone into base, volume-button
side first.
STEP 3.
Insert each lid corner under rubber seal of
base, then press in.
If necessary, gently pull back rubber seal
to slip lid underneath.
STEP 4.
Press around lid corners and edges to
secure onto base.
PURSUIT SERIES
Install Guide
©2018 Otter Products, LLC. All rights reserved. The OtterBox name and OtterBox trademarks are the property of Otter Products, LLC, registered in the U.S. and other countries.
Other trademarks are the property of their respective owners.
Limited Product Warranty: otterbox.com/warranty

OtterBox PURSUIT Series Specifications

General

Brand	OtterBox
Scratch Protection	Yes
Impact Protection	Yes
Port Covers	Yes
Series	PURSUIT Series
Type	Case
Compatibility	Varies by device model (e.g., iPhone, Samsung Galaxy)
Material	Polycarbonate
Wireless Charging Compatible	Yes
Color Options	Varies by model

Summary

OtterBox Pursuit Series Installation Guide

Step 1: Open Case Lid

Locate notch, open seal, and pull lid away from the base.

Step 2: Insert Phone

Slide the phone into the base with the volume-button side first.

Step 3: Secure Lid Under Seal

Insert lid corners under the base's rubber seal and press in.

Step 4: Secure Case Edges

Press around lid corners and edges to secure the case onto the base.