What to do if Otto Bock Wheelchair driving function is blocked?
If the driving function of your Otto Bock Wheelchair is blocked, it might be because the battery charger is connected. Disconnect the battery charger to resolve this.
What to do if Otto Bock B400 shows controller error?
If you're encountering a controller error with your Otto Bock Wheelchair, it might be due to a defective controller. Check all connections to resolve this issue.
Why does my Otto Bock B400 show a joystick error?
If you're getting a joystick error on your Otto Bock Wheelchair, the joystick might not have been in the zero position when you switched it on. To fix this, switch the joystick to the zero position before turning on the wheelchair.
How to troubleshoot communication error between control panel and controller on Otto Bock Wheelchair?
If you're experiencing a communication error between the control panel (joystick) and the controller on your Otto Bock Wheelchair, it could be due to a poor cable or loose plug connection. Check all the connections to resolve this.
What causes short circuit on battery connection to right motor in Otto Bock B400 Wheelchair?
If there's a short circuit on the battery connection to the right motor of your Otto Bock Wheelchair, it might be due to a broken cable. Check the battery connection to the right motor.
What causes short circuit on battery connection to left motor in Otto Bock B400?
If there's a short circuit on the battery connection to the left motor of your Otto Bock Wheelchair, it could be due to a broken cable. Check the battery connection to the left motor.
What to do if Otto Bock B400 shows a joystick error?
If your Otto Bock Wheelchair displays a joystick error, ensure the joystick is in the zero position before switching on the device. This should resolve the error.
What should I do if my Otto Bock Wheelchair shows a controller error?
If your Otto Bock Wheelchair displays a controller error, it may be due to a defective controller. Check all connections to the controller.
How to fix a joystick error on Otto Bock Wheelchair?
If you're getting a joystick error on your Otto Bock Wheelchair, make sure the joystick is in the zero position before you switch the power on. This is likely due to the joystick not being in the zero position during startup. Switch the joystick to the zero position and then switch on the power.
What to do if Otto Bock Wheelchair shows battery overvoltage?
If your Otto Bock Wheelchair is showing a battery overvoltage error, it could be due to the voltage being too high or loose battery contacts. Continue driving slowly. Check the plug contacts.
General| Obstacle height | 5 cm |
|---|---|
| Max. speed | 6 km/h |
| Max. user weight | 140 kg |
| Frame Material | Steel |
| Front Wheel Size | 200 mm |
| Brakes | Electromagnetic |
| Footrests | Swing-away |
| Back height | 450 mm |
| Turning radius | 800 mm |
| Range | 35 km |
| Weight | 95 kg |
To Next Page
