What to do if Otto Bock Wheelchair shows battery overvoltage?
If your Otto Bock Wheelchair is showing a battery overvoltage error, it could be due to the voltage being too high or loose battery contacts. Continue driving slowly. Check the plug contacts.
What should I do if my Otto Bock Wheelchair shows a controller error?
If your Otto Bock Wheelchair displays a controller error, it may be due to a defective controller. Check all connections to the controller.
What to do if Otto Bock Wheelchair driving function is blocked?
If the driving function of your Otto Bock Wheelchair is blocked, it might be because the battery charger is connected. Disconnect the battery charger to resolve this.
What to do if Otto Bock B400 shows a joystick error?
If your Otto Bock Wheelchair displays a joystick error, ensure the joystick is in the zero position before switching on the device. This should resolve the error.
Why Otto Bock B400 battery shows undervoltage?
Otto Bock Wheelchair battery undervoltage can occur due to total battery discharge, a damaged battery cable, or a poor connection to the battery. Recharge the battery. Check the connection to the battery, and if there is a connection, recharge the battery.
What causes poor cable connection to the left motor on Otto Bock B400?
General| Obstacle height | 5 cm |
|---|---|
| Max. speed | 6 km/h |
| Max. user weight | 140 kg |
| Frame Material | Steel |
| Front Wheel Size | 200 mm |
| Brakes | Electromagnetic |
| Footrests | Swing-away |
| Back height | 450 mm |
| Turning radius | 800 mm |
| Range | 35 km |
| Weight | 95 kg |
To Next Page
