What to do if Otto Bock ParaGolfer Wheelchair shows battery under voltage?
If your Otto Bock Wheelchair displays a 'Battery under voltage' warning, it's likely due to the battery being deeply discharged. To resolve this, charge the battery as soon as possible.
How to fix controller temperature warning on Otto Bock Wheelchair?
The 'Controller temperature warning' on your Otto Bock Wheelchair indicates overheating due to excessive load. The suggested solution is to allow the system to enter a cool down phase.
How to fix motor temperature warning on Otto Bock ParaGolfer?
The 'Motor temperature warning' on your Otto Bock Wheelchair indicates overheating due to excessive load. The suggested solution is to allow the system to enter a cool down phase.
What causes communication error on Otto Bock ParaGolfer?
A communication error (alternating flashing signal) on your Otto Bock Wheelchair indicates a faulty connection between the hand control device and the controller, defective cabling, or a software/hardware issue.
Why Otto Bock ParaGolfer Wheelchair displays battery over voltage?
If your Otto Bock Wheelchair shows a 'Battery over voltage' warning, it means the voltage is too high, possibly after a full charge or driving downhill.
What to do if Otto Bock Wheelchair shows joystick warning?
The 'Joystick warning' on your Otto Bock Wheelchair can be resolved by bringing the joystick to the zero position before switching on the device.
What causes emergency stop on Otto Bock ParaGolfer?
The 'Emergency stop' on your Otto Bock Wheelchair is caused by a severe fault in the controller, hand control device, and / or drive motor malfunction.
What causes brake fault in Otto Bock ParaGolfer Wheelchair?
A 'Brake fault' in your Otto Bock Wheelchair is due to an open brake release or a defective brake.
What causes stand-up device motor fault in Otto Bock ParaGolfer Wheelchair?
A 'Stand-up device motor fault' in your Otto Bock Wheelchair is due to faulty cabling or plug connection, or a defective actuator.
What causes drive motor fault in Otto Bock Wheelchair?
A 'Drive motor fault' in your Otto Bock Wheelchair is due to faulty cabling or plug connection, or a defective actuator.
General| Category | Wheelchair |
|---|---|
| Type | Standing wheelchair |
| Armrest Height | Adjustable |
| Weight | 150 kg |
| Seat Width | 45 cm |
| Height Adjustment | Yes, powered stand-up function |
| Features | All-terrain capability, joystick control, adjustable seating |
To Next Page
