To Next PageTo Next Page
Need help?Do you have a question about the Otto Bock Pheon 3R62 and is the answer not in the manual?
General| Product Type | Prosthetic Knee |
|---|---|
| Amputation Level | Transfemoral |
| Maximum Body Weight | 125 kg |
| Material | Aluminum |
| Polycentric | Yes |
| Stance Phase Control | Yes |
| Connection Type | Pyramid adapter |
| Water Resistance | No |
| Adjustability | Yes |
| Knee Disarticulation | Yes |
| Hip Disarticulation | No |
| Activity Level | Moderate |
| Control | Mechanical |
| Flexion Angle | 150 degrees |
| Compatibility | Prosthetic limbs |
Details prosthetic components suited for combination with the 3R62 knee joint.
Specifies the sole purpose of the prosthetic knee joint for lower limb fittings.
Defines the MOBIS mobility system classification for product use.
Outlines allowable and unallowable temperature, humidity, and environmental factors.
States the tested service life based on load cycles and patient activity level.
Clarifies the meaning of CAUTION and NOTICE symbols for user awareness.
Provides essential precautions for safe product use, handling, and combination.
Guidance for prosthetists on tailoring and aligning the prosthesis for patients.
Instructions on how to activate and deactivate the prosthetic knee joint lock.
Steps for installing the lock release cable system for the prosthetic socket.
Advice on applying and using approved cosmetic foam covers with the prosthesis.
Detailed process for initial static alignment of the prosthetic components.
Procedures for optimizing static alignment using the L.A.S.A.R. Posture.
Guidance on checking and adapting prosthesis settings for optimal patient walking.
Final steps including screw tightening and functional verification of the prosthesis.
General guidance on product usage and precautions against mechanical overload.
Instructions and cautions for operating the lock slide mechanism safely.
Procedures for cleaning the prosthetic joint using approved agents and methods.
Manufacturer's liability disclaimer regarding product use and modifications.
Declaration of compliance with European Directive 93/42/EEC for medical devices.
