● This function is applicable to partial of models.
Introduction for buttons on remote controller
scavenging functions simultaneously; LCD displays " " and " ". Press this
button for the third time to quit health and scavenging functions simultaneously.
Press the button for the fourth time to start health function; LCD display " ".
Press this button again to repeat the operation above.
14
LIGHT button
Press this button to turn off display light on indoor unit. " " icon on remote
controller disappears. Press this button again to turn on display light. " " icon is
displayed.
15
TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit’s display. The setting on
remote controller is selected circularly as below:
no display
●
●
●
Note:
●
●
●
●
When selecting " " or no display with remote controller, temperature indicator
on indoor unit displays set temperature.
When selecting " " with remote controller, temperature indicator on indoor unit
displays indoor ambient temperature.
When selecting " " with remote controller, temperature indicator on indoor unit
displays outdoor ambient temperature.
Outdoor temperature display is not available for some models. At that time, indoor
unit receives " " signal, while it displays indoor set temperature.
It’s defaulted to display set temperature when turning on the unit.There is no
display in the remote controller.
Only for the models whose indoor unit has dual-8 display.
When selecting displaying of indoor or outdoor ambient temperature, indoor
temperature indicator displays corresponding temperature and automatically turn
15
To Next Page
Loading...
Need help?
General
