Need help?Do you have a question about the Ouellet OTP-B18000D and is the answer not in the manual?
General| Model | OTP-B18000D |
|---|---|
| Refrigerant | R410A |
| Compressor Type | Rotary |
| Wattage | 1500 W |
| HSPF | 8.5 |
| Operating Temperature (Heating) | -15°C to 24°C |
| Outdoor Unit Weight | 35 kg |
| Heating Capacity | 18000 BTU |
| Cooling Capacity | 18000 BTU |
| Indoor Unit Type | Wall-mounted |
| Outdoor Unit Noise Level | 52 dB(A) |
Instructions for removing, cleaning, and reattaching the front panel of the unit.
Guidance on how to clean the air filters of the heat pump unit.
Key safety and procedural instructions for unit installation by technicians.
Criteria for selecting an appropriate installation location for the heat pump.
Guidelines for choosing the optimal placement for the indoor unit.
Steps for mounting the rear panel of the indoor unit.
Instructions for creating the wall opening for piping and wiring.
Guidance on properly installing the water drainage hose.
Steps for wiring the indoor and outdoor units together.
Instructions for connecting the electrical wiring for the outdoor unit.
Steps for installing the pipe that runs over the unit.
Procedures for purging air and testing for refrigerant leaks.
How to manage condensate drainage for the outdoor unit during heating.
A checklist of items to verify after the heat pump has been installed.
Steps for performing a test run of the unit after installation.
Steps for installing the healthy filter into the unit.
Guidance on cleaning and maintaining the healthy filter.
Information regarding the expected service life of the healthy filter.
To Next Page
