Need help?Do you have a question about the Ouellet SED18KCH16S and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Heating Seasonal Performance Factor (HSPF) | 8.5 |
| Seasonal Energy Efficiency Ratio (SEER) | 16 |
| Refrigerant | R410A |
| Model | SED18KCH16S |
| Heating Capacity | 18000 BTU |
| Cooling Capacity | 18000 BTU |
| Power Supply | 208-230V, 60Hz |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Weight | 35 kg |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Indoor Unit Dimensions (HxWxD) | 210 mm |
| Outdoor Unit Dimensions (HxWxD) | 550 x 845 mm |
Details the meaning of warning symbols used in the manual.
Safety guidelines for operating and maintaining the appliance, including user responsibilities.
Critical safety instructions and regulations for electrical wiring during installation.
Guidelines for selecting safe and appropriate installation locations for the unit.
Lists and explains the function of each button on the remote control.
Describes the meaning of icons displayed on the remote control's screen.
Details how to use ON/OFF and MODE buttons, including operational modes and fan settings.
Explains fan speed adjustment, angle control, X-FAN function, and TURBO mode.
How to control horizontal and vertical louvre swing for air direction.
Instructions for setting timers, the I FEEL function for temperature sensing, and T-ON/T-OFF operations.
Guide to setting the clock, sleep mode, and WiFi connectivity features.
How to control display lights and switch temperature display units or modes.
Explains advanced features like energy saving, 8°C heating, child lock, and temperature display switching.
Detailed instructions for cleaning the indoor unit surface and air filters.
Table listing phenomena, items to check, and solutions for common problems.
Further details on specific issues like mist emission, odor, noise, and abnormal operation.
Visual representation of minimum space requirements around indoor and outdoor units for installation.
Lists essential tools needed for the proper installation of the unit.
Advice on choosing suitable locations for indoor and outdoor units to ensure optimal performance and safety.
Specific considerations for placing the outdoor unit to ensure ventilation and prevent interference.
Safety precautions and guidelines for connecting the unit to the power supply, including grounding.
Procedures for mounting the wall frame, opening piping holes, and preparing for pipe connection.
Connecting pipes to the indoor unit and installing the drain hose for condensate removal.
Connecting electrical wires and positioning the ambient temperature sensor for the indoor unit.
Binding pipes, power cords, and drain hoses, and hanging the indoor unit securely.
Instructions for fixing the outdoor unit support, installing the drain joint, and placing the unit.
Securing the outdoor unit and connecting indoor and outdoor pipes using specified torque.
Connecting electrical wiring for the outdoor unit and arranging pipes along the wall.
Steps for performing vacuum pumping to remove air and moisture from the refrigerant lines.
Methods for checking the system for refrigerant leaks after installation.
Final checks to ensure correct installation, wiring, and operation before use.
Details on maximum pipe lengths, height differences, and refrigerant charge requirements.
Step-by-step guide on how to properly expand pipe ends for connection, preventing leakage.
To Next Page
