Outback S-Lite User Guide 20 PN 875-0194-000 Rev D1
Chapter 3: Using Guidance Features
Main Run Display Screens
The S-Lite has two main run display screens: the Straight Guidance Mode screen and
the Contour Guidance Mode screen (shown below). You can access additional display
screens from these main run screens.
Additional Display Screens
While operating in either Straight or Contour guidance modes, the arrow keys present
additional display screens. Repeatedly pressing the DOWN ARROW button displays
the following screens; repeatedly pressing the UP ARROW displays the same screens
in the reverse order.
GPS signal quality
(3-4 bars typical
with SBAS
Straight Guidance display message Contour Guidance display message
Main Run screen
Perimeter Area screen
Ground Speed and Heading screen
Snap A=B screen
Select Straight guidance to generate parallel paths for
S-Lite to follow. When you press the STRAIGHT
GUIDANCE button the menu below appears.
SLite_UG_D1.book Page 20 Monday, December 23, 2013 2:14 PM
To Next Page
Loading...