To Next PageTo Next Page
Need help?Do you have a question about the Outback Guidance Series and is the answer not in the manual?
General| Brand | Outback |
|---|---|
| Model | Guidance Series |
| Category | Farm Equipment |
| Language | English |
Introduces Outback S-Lite, detailing its features and the blend of market-proven simplicity with new GPS receiver technology.
Lists S-Lite system parts, providing part numbers and descriptions for each component.
Details critical steps for correct installation, including mounting the antenna, console, and routing cables for optimal performance and safety.
Explains two methods for powering S-Lite: connection to a rate controller or a 12 VDC power port.
Guides users through setting values in Setup and Service menus to configure the S-Lite system for optimal performance.
Outlines console features and summarizes Straight and Contour guidance modes, noting their differences and capabilities.
Explains the Headland Alert indicator function, which illuminates when the vehicle crosses into a previously applied area.
Describes primary display screens for Straight and Contour guidance modes, showing key operational information.
Details accessing and viewing supplementary display screens for system info like Area, Speed, and Heading.
Explains establishing an A=B line and using straight guidance for linear/circular passes, including marking points and auto-guidance.
Describes logging initial passes or guiding from previous passes in Contour mode, used for freestyle guidance and contour following.
Provides steps to calculate field perimeter area by driving the first contour pass around the field.
Explains the importance of Stop Guidance and summarizes functions like Hold, Return Here, and Erase Memory for managing jobs.
Explains available differential correction types (SBAS, e-Dif) and selection via Service menu for accurate positioning.
Details the patented e-Dif correction method, its configuration, and power-on initialization process for achieving DGPS lock.
Describes sharing S-Lite DGPS signals with third-party mobile apps using NMEA 0183 messages.
Explains configuring NMEA message and baud rate settings in the Service menu for external application communication.
Provides a table of helpful operating/troubleshooting info, including correction type, satellite status, and software versions.
Presents a flowchart to diagnose and resolve common S-Lite issues, guiding users through problem-solving steps.
Guides testing antenna voltage to ensure receiver power supply and coaxial cable integrity.
Explains checking DGPS signal quality using Bit Error Rate (BER) via the Diagnostics menu.
