Outback S-Lite User Guide 25 PN 875-0194-000 Rev D1
Chapter 3: Using Guidance Features
Stopping Guidance
It is important to use the Stop Guidance feature whenever S-Lite is not guiding.
During guidance, the S-Lite records all movement. Pressing the STOP GUIDANCE
button tells S-Lite not to guide and not to record movement. Table 3-2 provides a
summary of Stop Guidance features.
Hold Logging Data/Guiding
Use the Hold feature to stop logging data during turns or to relocate to another
section of the field.
1. Press STOP GUIDANCE. Do not select any available menu items.
2. To resume guiding and logging data, press STRAIGHT GUIDANCE or
CONTOUR GUIDANCE.
S-Lite prompts to use the previously defined A=B line.
3. Press ENTER to continue with the current job.
Return Here
Use the Return Here function to suspend application in order to reload or at the end
the day. It saves the job and records the end point, allowing S-Lite to restart exactly
where it left off.
1. Press STOP GUIDANCE.
2. Select RETURN HERE on the screen and press
ENTER.
3. Press STRAIGHT GUIDANCE or CONTOUR
GUIDANCE.
S-Lite prompts to use the previously defined A=B line.
4. Press ENTER to continue with the current job.
Table 3-2: Stop Guidance feature summary
Feature Description
Hold Stops logging. Use during turns or to relocate.
RETURN HERE Saves the job and the ending point for later return.
RTRN PREV PT Starts guidance to take you back to a previously saved point.
UPDATE e-Dif Optional menu item if the correction type is set to e-Dif. Resets e-
Dif correction to match current position with previous return point.
Note: Hemisphere’s patented Extended Differential (e-Dif
®
)
software enables S-Lite to perform with differential-like accuracy
for extended periods of time without the use of a differential
service. See “Using e-Dif” on page 29 for information on e-Dif.
ERASE MEMORY Clears memory in preparation of a new job.
SLite_UG_D1.book Page 25 Monday, December 23, 2013 2:14 PM
To Next Page
Loading...