Outback STX User Manual

Outback STX™
Quick Reference Guide
Part Number: 875-0332-000 Rev A1
Starting STX
1. Power up the STX and any additional components connected
to STX.
2. Press Accept on the
warning screen. The
window at right
appears.
3. Press any of the Job
buttons to work with a
job or press Cancel
to start STX without a
job.
The first time you
start STX only the
New job and Cancel buttons are available. After you create a
job, the next time you start STX all four buttons are available.
STX must have GPS to begin a job and
provide guidance. The satellite indicator and
signal strength bars show if you have GPS
and the signal strength. If there is no GPS
signal, none of the job buttons on the above
window are available (they are all gray).
To delete all jobs:
Exporting a Job
To export a single job:
To export all jobs:
Importing a Job
Job files must be in 'S3Jobs' folder on USB drive.
To import a single job:
To import all jobs:
Closing a Job
Paths and Boundaries
Setting an A=B Line
Apply can be on or off when setting an A=B line.
Setting an A + Direction Line
Apply can be on or off when setting an A + Direction line.
Using a Previous A=B Line
Apply can be on or off when using a previous A=B line.
Creating an Initial Contour Pass
Setting a Pivot Line
Creating a Boundary
LEFT and INCLUDE buttons used to show path (options are
LEFT/RIGHT/CENTER and INCLUDE/EXCLUDE).
Adjusting Paths
Snapping the Guidance Line to the Current Location
In Straight guidance mode: In Pivot guidance mode:
Shifting the Guidance Line
In Straight guidance mode:
In Pivot guidance mode:
Other Tasks
Dropping a Marker
Making an eTurn
Apply Control Button
Press the Apply control button to toggle on and off
data logging or coverage data for the current job:
• On (orange button) indicates data logging
• Off (blue button) indicates no data logging
Select
job to
export
Insert USB
drive in
terminal
Insert USB
drive in
terminal
Select
job to
import
Insert USB
drive in
terminal
Insert USB
drive in
terminal
Drive the
first pass
Vehicle at
start of
first pass
Vehicle at
start of
first pass
Enter
angle
Vehicle at
start of
first pass
Select
A=B line
from list
Vehicle at
start of
first pass
Drive
the
contour
Vehicle at
start of
first pass
Begin
driving
the circle
Vehicle at
start of
boundary
Drive
the
boundary

Outback STX Specifications

General

Brand	Outback
Model	STX
Category	Farm Equipment
Language	English