Outdoor Tech KODIAK PLUS 2.0 - Power up

POWER UP
- Connect the micro USB port cable to the Kodiak Plus
2.0 input Port.
- Connect the USB Port to the computer or the 5V/2A
USB Power Adapter.
- The Red LED Lights will start flashing when you charge
the Kodiak Plus 2.0. When charging is complete, all of
the Red LED lights will turn off.
Battery Level
Fully Charged
80% Remaining
60% Remaining
40% Remaining
20% Remaining
Less than 5% Remaining*
(Flashing)
Battery Level Lights
2