unattended for longer than a day, so using an
SD card is recommended. Insert the SD card
(with the camera’s power switch in the
OFF
position) before beginning to operate the
camera. Do not insert or remove the SD card
when the power switch is in the
ON
position.
The
Outdooree R6
uses a standard SD
(Secure Digital) memory card to save photos
(in .jpg format) and videos. SD and SDHC
(High Capacity) cards up to a maximum 16GB
capacity are supported. Outdooree
recommends using Outdooree or Sandisk
brand SD cards. Before inserting the SD card
into the card slot after opening the camera’s
front cover, please make sure that the write-
protect switch on the card is in the up/off
position (when looking at the front of the card
the switch is on the left side of the card) (fig. 4).
The following describes how to insert and
remove the SD card:
• Insert the SD card into the card slot with its
label side upwards (see above). A “click” sound
indicates that the card is installed successfully. If
the wrong side of the card is facing up, you will
10
To Next Page
Loading...