Outdooree R6 - Restore Factory Default Settings

parameter has two values: “camera” and
“video”. Pressing UP key can switch between
these two parameters.
Press OK key to save setting or MENU key to
cancel setting and exit. Please note, you’ll quit
the parameter setting without any saving and
no parameter is changed if you press the
MENU key at any time before pressing OK key
.
4.2 Restore Factory Default
settings
a. Note: Restoring the factory default
settings will remove any previous settings
you have saved.
b. Enter into SETUP mode, Press the
MENU button.
c. Press the RIGHT or LEFT key till the
“Default” appears, Push the OK key to load
default settings or MENU key to cancel this
operation.
15