Camera won’t power up
1. Make sure that you have installed at least 4
batteries (the required minimum #) in the
battery compartment, starting at the top, filling
battery spaces 1-4 with no “gaps”.
We recommend using 8 new alkaline or lithium
AA batteries in all Outdooree R6 cameras.
2. Make sure that the batteries are installed
correctly, observing proper polarity. Always
place the negative (flat) end of each battery in
contact with the long spring side of its slot
inside the camera.
3. After moving the switch from “OFF” to “ON”,
make sure that the switch is correctly in
position to ensure the proper mode (avoid
positions “between” two modes).
Still Photo and/or Video Quality Problems
a. Night photos or videos appear
too dark
35
To Next Page
Loading...