1.8 AUX Input CH1/CH2
These inputs are automatically selected in place of the line input CH1/CH2 when an external voltage of 24V DC is applied
through the AUX COMMAND input, these inputs can be used for emergency signals as pre-recorded evacuation messages
or similar alarm messages.
1.9 Alarm CH1/CH2
Relays output 24V outputs to command external equipment; alarm relays output normally closed, open for reporting
amplifier faults
1.10 AES/EBU Input
On DSP equipped amplifiers CH2 is the AES/EBU input.
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: info@outline.it
10
The Sound of Big Ideas
To Next Page
Loading...
