EasyManua.ls Logo

Outsunny 840-268V81 User Manual

Outsunny 840-268V81
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
FR_IMPORTANT:A LIRE ATTENTIVEMENT ET À CONSERVER POUR CONSULTATION
ULTÉRIEURE.
ES_IMPORTANTE, LEA Y GUARDE PARA FUTURAS REFERENCIAS.
PT_IMPORTANTE, RETER PARA REFERÊNCIA FUTURA: LEIA ATENTAMENTE.
DE_WICHTIG! SORGFÄLTIG LESEN UND FÜR SPÄTER NACHSCHLAGEN AUFBEWAHREN.
IT _ IMPORTANTE! CONSERVARE IL PRESENTE MANUALE PER FUTURO RIFERIMENTO E
LEGGERLO ATTENTAMENTE.
US_CAUS_CA
840-268V81
IN240100110V01_US
EN_Tips:Please do not use in bad weather to avoid damage.
FR_Conseils : Ne pas utiliser par mauvais temps an d'éviter tout dommage.
ES_Consejos:No utilizar con mal tiempo para evitar daños.
PT_Dicas: Não utilizar com mau tempo para evitar danos.
DE_Tipps:Bitte nicht bei schlechtem Wetter verwenden, um Schäden zu vermeiden.
IT_Suggerimenti: non utilizzare in caso di maltempo per evitare danni.
Tools Recommended
Question and Answer IconNeed help?

Do you have a question about the Outsunny 840-268V81 and is the answer not in the manual?

Outsunny 840-268V81 Specifications

General IconGeneral
BrandOutsunny
Model840-268V81
CategoryLawn and Garden Equipment
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

PARTS LIST

Awning Arm and Tape Safety Warning

STEP 1: Thread Fabric Line

STEP 2: Connect Roller Tube and Front Bar

STEP 3: Fabric Assembly and Roller/Front Bar Connection

STEP 4: Arm-bar Link and Front Bar Assembly

STEP 5: Roll Awning Fabric Tightly

STEP 6: Roller Support Assembly

STEP 7: Connect Wire and Torsion Bar

STEP 8: Setting Awning Position

STEP 9: Connect Alu Cover

STEP 10: Install Left and Right Supports

STEP 11: Finishing Awning Assembly

INSTALLATION

Notes About Wall Mounting

General advice for securing the awning to various wall types, emphasizing firm surfaces and proper bracket attachment.

Mounting Height

Guidance on determining ideal height and angle, including calculations for drop and pitch.

STEP 1: Measuring the Mount Site

STEP 2: Drilling the Bolt Holes

STEP 3: Preparing For Mounting

STEP 4: Mounting the Wall Brackets

STEP 5: Mounting the Awning

OPTIONAL INSTALLATION

ADJUSTING THE AWNING PITCH/ANGLE

Button Specification

Remote Emitter Buttons

Specific functions and operations for each button on the remote control unit.

Emitter Operation Warnings

Important safety and usage warnings for the remote emitter, including battery and environmental considerations.

Setting Awning Ranges

Adjusting Closing Range

Instructions on setting the upper limit for awning retraction using the roller mechanism.

Adjusting Opening Range

Instructions on setting the lower limit for awning extension using the roller mechanism.

Remote Pairing and Control

Pairing and Emitter Management

Steps for pairing the remote emitter, adding additional emitters, and deleting them.

Jog/Tilt and LED Control

How to activate jog/tilt mode and adjust LED light brightness.

Troubleshooting

Motor Not Running

Identifies possible causes and solutions when the awning motor fails to operate.

Related product manuals