Outsunny 861-028 User Manual

ASSEMBLY & INSTRUCTION MANUAL
READ AND SAVE THIS INSTRUCTIONS FOR FUTURE USE
INefa017V03_UK_FR_ES_DE_IT
861-028
Note : Do not tighten bolts fully until all parts are connected!
Note : Ne serrez pas les boulons à fond tant que toutes les pièces ne sont pas connectées!
Hinweis: Ziehen Sie die Schrauben erst fest an, wenn alle Teile verbunden sind!
Nota: non serrare completamente i bulloni fino a tutte le parti non sono ancora collegate!
Nota: No apriete los tornillos completamente hasta que todas las partes están conectadas!

Outsunny 861-028 Specifications

General

Type	Gazebo
Eaves Height	6.5'
Material	Steel, Polyester Fabric
Color	Beige
Assembly Required	Yes
Dimensions	9.7' L x 9.7' W x 8.5' H

Summary

Garden Chair Usage and Care

Key Usage Tips

Guidance on safe and optimal use, including weight limits and weather precautions.

Assembly and Maintenance

Precautions before assembly and routine care instructions for the chairs.

Storage Advice

Proper methods for storing the furniture when not in use to prevent damage.

Packing and Parts Inventory

Contents of Packing Boxes

Details the parts included in each of the four numbered packing boxes.

Component Identification List

All Parts and Hardware

Visual reference for every component and hardware piece with quantities and codes.

Assembly Steps: Frame and Table Base

Step 1: Frame Construction

Assemble the main frame structure using specified parts and hardware.

Step 2: Table Base Assembly

Construct the base of the table, connecting support elements.

Assembly Steps: Table Top

Step 3: Attaching Table Top Panels

Install the glass panels onto the table frame.

Step 4: Table Finalization

Completing the assembly of the table structure.

Assembly Steps: Chair Frames

Step 5: Chair Frame Assembly (Part 1)

Constructing the initial frame for the chair using parts K, O, S, U.

Step 6: Chair Frame Assembly (Part 2)

Continuing chair frame construction with parts N, S, U.

Assembly Steps: Chair Seats and Bases

Step 7: Chair Seat Attachment

Connecting the seat support structure using parts M, S, U.

Step 8: Chair Base Completion

Attaching the base components (Z2) to the assembled chair frames.

Assembly Steps: Chair Supports and Table Sides

Step 9: Attaching Chair Supports

Connecting support beams (A, B) to chair frames using Q and U.

Step 10: Attaching Table Side Panels

Securing side panels (C) to the table structure with Q and U.

Assembly Step: Final Chair Placement

Step 11: Placing Stools/Ottomans

Positioning the Z1 components, completing the set.

Importer and Distributor Information

Contact Details by Region

Lists importer addresses for UK, France, Spain, Germany, and Italy.