To Next PageTo Next PageWhat to do if Outwell Camping Equipment lamps do not light with the remote?
If your Outwell Camping Equipment lamps don't light when using the remote, first check if you can switch the light unit on using the operating button on the bottom of the unit. If it still doesn’t work, try recharging the light units.
How to sync Outwell ONS LIGHT UNIT SET Camping Equipment light units?
To sync your Outwell Camping Equipment light units, set one light unit to the brightest setting using the remote. Then, set the other unit to the brightest setting using the operating button on the bottom of the unit.
Why is the range of my Outwell ONS LIGHT UNIT SET Camping Equipment remote decreased?
If the range of your Outwell Camping Equipment remote has decreased, or you need to press the buttons hard for it to work, replace the batteries in the remote.
General| Brand | Outwell |
|---|---|
| Model | ONS LIGHT UNIT SET |
| Category | Camping Equipment |
| Language | English |
Read instructions before use. Avoid staring into lamp, handle warm units carefully, supervise children, keep dry, avoid heat.
Details the components and buttons of the remote control unit for operating the light system.
Details the components of the light unit, including ports, LEDs, and mounting features.
Instructions on how to install the ONS Light Units into designated pockets within tents or awnings.
Guide on using the remote control to turn lights on, dim, and switch off, noting brightness memory.
Instructions for charging light units via USB, including indicator lights and charging in situ.
Advice on regular checks and cleaning the light units and remote with a damp cloth.
Solutions for problems like lamps not lighting, remote not working, or units being out of sync.
Guidance on storing the light units for long periods, including recharging every 12 months.
Step-by-step instructions for disassembling the light units and remote when reaching the end of their usable life.
Instructions on how to properly dispose of light units and remote components according to local regulations.
Details on power, battery type, input, and frequency for both the light unit and the remote control.
