7
UK: INSTRUCTION MANUAL
5. Cleaning & maintenance
Visually check the general condition of the light units and the accessories on a regular basis.
The light units and remote can be cleaned with a damp cloth if necessary.
WARNING: Do not use sharp or hard objects or cleaning agents for cleaning as these may damage the product.
Replacing the remote batteries:
Reassemble the remote using reverse order
of the above. Take care to install all
components, so nothing gets pinched and
take care not to overtighten the screws.
Remove the three screws using a Philips 0
screwdriver.
Lift the PCB (green part) with the battery
holder out of the remote housing.
Slide the black battery retainer out of the
battery holder, using a fingernail.
Remove the two CR2016 batteries from the battery retainer and
replace with new batteries. Observe the polarity of the batteries.
Take care to dispose of the used batteries according to local regulations.
1.
4. 5.
2. 3.
To Next Page
Loading...
